| One of the most important details for a successful insulation is to use concordant drain systems along with the membranes
applied. Our roof and terrace drains with vertical and horizontal outlets, branded MAXDRAİN, are manufactured from a special
raw-material called I20 and due to their upper drain systems they provide absolute tightness. |
 |
 |
Code of
Product |
Size |
Description |
Code of
Product |
Size |
Description |
| 300050BMA |
Ø50mm |
Bitumen membrane strainers with side outlet |
300060BMA |
Ø60mm |
Bitumen membrane strainers with side outlet |
| |
| Intended Use: |
Application: |
Problems with water resistance generally emerge on lowest part of roof or terrace. Due to slope, collected water goes towards
this part. At this point, the building material that will provide tightness between evacuation pipes and coating, are our drain systems
branded MAXDRAİN. |
The model in appropriate diameter is placed on the tip of the evacuation pipe. Thanks to its chamfered structure,just a black plate
seen on upper part shall remain. During the placement of insulation coating, heating process is just applied to the membrane
coating. At this point, it is an important detail to apply the bitumen parts, liquefied by melting a piece of membrane, onto outlet parts
for our system to work seamlessly. |
| |
 |
 |
Code of
Product |
Size |
Description |
Code of
Product |
Size |
Description |
| 300070BMA |
Ø70 mm |
Bitumen membrane strainers with side outlet |
300100BMA |
Ø100 mm |
Bitumen membrane strainers with side outlet |
 |
 |
Code of
Product |
Size |
Description |
Code of
Product |
Size |
Description |
| 300125BMA |
Ø125 mm |
Bitumen membrane strainers with side outlet |
3070100BMA |
Ø70*100 mm |
Bitumen membrane strainers with side outlet |
|
|
Code of
Product |
Size |
Description |
| 300150BMA |
Ø150 mm |
Bitumen membrane strainers with side outlet |
